iCarbot machine correction has been completed before delivery, the abnormal cases without further correction, correction of the heavier body weight at the same time, the correction of experience the effect will be better, the factory calibration is to use 80 kg of weight do calibration, at the same time version 1.01 APP correction wasn’t perfect, temporarily can only use artificial correction method or using version 1.02 APP for correction after the Dragon Boat Festival.
iCarbot guide
After receipt of the goods when use iCarbot I note that at present there are 4 seconds of each boot when no-load correction, wait 4 seconds after the buzzer rang 1, after a short sound, 2 long boot and no-load correction complete.If the user has to get on the bus at boot on 4 seconds, the machine will not go, must get off, long press the power switch for 3 seconds to turn it off, and then the new boot, wait 4 seconds after the buzzer rang 1 sound short, 2 long sound, you can get on the bus to enjoy the happiness of iCarbot.
iCarbot guide
iCarbot after standing up, the body center of gravity should be upright in the middle of the car, machine will start around 1 second, if the body site has been to the earth to a direction at the beginning, the machine is refused to start, this is in order to protect the user’s initial use, the body is too large to a direction that is not correct usage, can lead to boot will produce a sharp turn or backward and forward, affect experience with security!
Guide
Recalibration please follow these steps, calibration weight over 80 kg and advisable, the weight correction, the better the results (not more than 120 kg), because now 1.01 APP correction function is not perfect, please don’t use (1.02 version can be used after the Dragon Boat Festival).
Small icarbot body way correction method of use:
A, enter the correction mode: click the power switch, 4 seconds after the buzzer rang long ring 1, 2 short rang again.Said boot and no-load correction success!After startup, long press the power switch for 6 seconds, when the long press to 3 seconds, buzzing short rang 1 and will enter the shutdown state, don’t loosen the switch at this time, continue to long press to 6 seconds, when ringing again hear bees sirens, loosen the switch and enter the correction mode
B, no-load correction: click the power switch, buzzer rang 1 long, short ring 2, to complete a no-load correction;
C, left correction: two foot up, and stood to attention, and then focus the whole uniform 60-40, stable, another man again click the power switch, buzzer long ring 2, 2 short rang again, complete left correction;
D. right correction: then focus the overall uniform slants to the right, as well as on the left side of the force and Angle, stable, another man again click the power switch, buzzer long ring 2, 2 short rang again, complete right correction;
E. before correction: overall even further forward, then the center of gravity remained stable, another man again click the power switch, two buzzer long ring 2, 2 short rang again, correction before completion;
F. after correction, and then focus the overall uniform partial back, as well as the side force and Angle, stable, another man again click the power switch, buzzer long ring 2, 2 short rang again, after the completion of the correction;
G, after completing the above steps, get off, click the power switch again, buzzer ring 2 long, short ring 1, calibration is complete;
H, long press 6 seconds the power switches, when long press to 3 seconds, will enter the shutdown state, don’t loosen switch, continue to the second after heard ringing bee shedding two, loosen the switch, the exit correction mode, enter the cycling mode.
It can also be three seconds long press the power switch, short buzzer rang 1, enter the shutdown state.And then start up, also can return cycling mode.
Above guide is the Chinese version translated by google translate directly, so some sentences are broken. For detailed information, please leave a message below, you’re always welcome and will get fast reply 🙂